CNET CAR-854 Manuel d'utilisateur télécharger pdf (Page 56)

CAR

854 Wireless

ter

User

Manua

- 56 -

Field

Description

IP QoS

Enable/disable the IP QoS function.

Source IP

The IP address of the traffic source.

Source Netmask The source IP netmask. This field is required if the source IP has been entered.

Destination IP

The IP address of the traffic destination.

Destination Netmask

The destination IP netmask. This field is required if the destination IP has been entered.

Protocol The selections are TCP, UDP, ICMP and the blank for none. This field is required if the

source port or destination port has been entered.

Source Port The source port of the selected protocol. You cannot configure this field without entering

the protocol first.

Destination Port The destination port of the selected protocol. You cannot configure this field without

entering the protocol first.

Physical Port The incoming ports. The selections include LAN ports, wireless port, and the blank for not

applicable.

Fields on the second setting block of this page:

Field

Description

Outbound Priority

The priority level for the traffic that matches this classification rule. The possible

selections are (in the descending priority): p0, p1, p2, p3.

IP Precedence

Select this field to mark the IP precedence bits in the packet that match this classification

rule.

IP Type of Service

Select this field to mark the IP TOS bits in the packet that match this classification rule.

802.1p

Select this field to mark the 3-bit user-priority field in the 802.1p header of the packet that

match this classification rule. Note that this 802.1p marking is workable on a given PVC

channel only if the VLAN tag is enabled in this PVC channel.

5.6.5 Remote Access

The Remote Access function can secure remote host access to your DSL device from

LAN and WLAN interfaces for some services provided by the DSL device.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 76 77

Pas de commentaire

CNET CAR-854 Manuel d'utilisateur Page 56